IMPORTANT: BELT SIZE MEASURING INSTRUCTIONS

Wilderness belts are sized by a true measured belt size to the nearest single inch, not a two inch range. For proper sizing, Wilderness suggests that you run a cloth tape through the belt loops of the pants that you would normally wear the belt with, pulling as tightly as you typically pull a belt, and measure to the nearest single inch (Please see the picture below for additional assistance).

If you regularly wear an in-the-waistband holster and mag pouches, it is recommended that you place them in your pants for measuring. Ideally, the hook fastener on the belt tab should center evenly in the loop fastener area on the belt body. From an ideal fit you will have an 1-3/4" of adjustment in each direction. This is usually enough of an adjustment to cinch down for something heavy on the outside of the belt, or loosen the belt for an in-the-waistband holster.

If your I.W.B. holster is for a particularly thick gun, you may want to assume an extra inch. You can also measure by laying a leather belt out flat on a table, and measure from the inside edge of the buckle away from the hinge to the hole that you currently use (it is important that the inside length of the buckle be included in the measurement,) and as above, measure to the nearest single inch.

If you would like any assistance in the measuring process, please feel free to call us (toll-free 877-486-6111), as we'll be glad to help.